|
|
|||||||
|
|
|
|
|
|
|
|
|
HOME |
BRANDS |
INTERCOM |
SURVEILLANCE |
SECURITY |
AUTOMATION |
CONTACT |
|
|
|
|
|
|
|
Sliding gates are widely used because their linear movement means that they do not require large operating spaces. Their automation requires flexible geared motors able to cope with various sized gates, different intensities of use, changing environ-mental situations, whilst always guaranteeing maximum conditions of safety, practicality and reliable operation. Ditec and Fadini Sliding Gate System has been designed bearing these principles in mind, and can today be considered the most careful synthesis of the “state of the art”, able to resolve all requirements for private, commercial and industrial use. |
|
|
|
|
|
|
Cross 3E represents an absolutely revolutionary innovation because whilst considering the peculiar features of the straight movement of the gate, it introduces new philosophies of control, acceleration and slowdown of the stroke, ensuring maximum conditions of safety in the case of obstacles. |
|
|
An elegantly designed geared motor, with a built-in control unit, able to move gates weighing up to 600 kg. |
|
|
DRIVE 700 has been designed and constructed for underground installation at the foot of gates and doors. Even pre-existing gates and doors can be invisibly operated by this equipment. It is available with or without two-way locking device (when no locking device model is supplied an electric lock must be mounted on the gate). An optional patented brake (damping device) can be built in the jack to slow down speed over the last 40 centimetres of the angular travel. A totally trouble free, anti-crush unit. In case of electric power failure it can be released by hand and pushed open. DRIVE 700 is one of the most successful, reliable and prestigious products by Meccanica Fadini.
|
|
|
Nyota 115 is a compact, stylish and very reliable operator to suit any design of sliding gates within the above specifications. The electric motor has been designed to endure high thermal load, being made of special materials, and has a braking device that keeps Nyota 115 stopped in any required position. It is also fitted with built-in stop switches, and a clutch device in an oil bath. Complete automatic operations are achieved through the control or keyswitch with stop button. It can take safety accessories: photocells and safety edge. It can withstand any climatic conditions. It is available with 0.5 HP, single-phase motor to operate up to 500kg gate weight; and 1.0 HP single-phase up to 800kg gate weight. Three-phase on request.
|
|
|
MEC 200 can operate sliding gates even of large size. It is available in two different models, vertical and horizontal so that the rack and gear can be fitted in the most suitable way to meet the required space limits and operate any gate. 0.5 - 1.0 - 1.5 HP, single and three-phase electric motors are available. The MEC 200 operator is operated by an electronic control box, to which the following accessories can be connected: the remote control radio set, the photocells, a pressure switch with radio link and flashing lamp.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HOME |
BRANDS |
INTERCOM |
SURVEILLANCE |
SECURITY |
AUTOMATION |
CONTACT |
|
|
|
|
|
|
|
|
|
|
||||||
|
Unbeatable Security with Technology & Automation |
||||||